Non-contact, automatic voltage test for voltages from 12-1000V AC for a wide range of applications

• For non-contact testing of AC voltages
• Display from 12 to 1000 V AC with simultaneous visual and acoustic voltage display
• The bright flashlight for illuminating the work area can be used independently of the voltage tester
• The visual LED bar chart shows the applied voltage - the higher the detected voltage or the closer the voltage source, the more LEDs light up
• Voltage display with bar diagram made up of five illuminated LEDs for easy interpretation / reading
• The acoustic voltage detector beeps at a higher frequency the higher the voltage or the closer the device is to a voltage source
• Automatic shutdown saves the battery and extends the battery life
• Screw-on battery cap with O-ring prevents the ingress of dust and water
• Light, compact tool with pocket clip can be stowed away practically and is quickly at hand
• IP67: Dustproof and waterproof
• Fall protection 2 m
• Protection classification CAT IV for 1000 V.

Technical specifications

• Deep, pulsating tone with 50 - 500 Hz; The blue LED goes out and the red LED flashes (approx. 2 times per second)
• Degree of contamination: 2
• Voltage: 12 - 1000 V AC
• Frequency: 50 - 500 Hz
• Standard: CAT IV (1000 V)
• Protection class: IP67: Dust-proof and waterproof
• Total length: 148 , 0 mm
• total width: 18.3 mm
• total height: 29.4 mm
• weight: 34.0 g
• fall protection: 2 m
• batteries: 2 x AAA (1.5V)

WARNING NOTICES

Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before use or maintenance. Failure to observe can lead to serious and life-threatening injuries.

Never assume that the neutral and earth conductors are dead. Neutral conductors in circuits with several conductors can still be live even if the connection is separated and must be checked again before they can be touched.