Prepojovací kábel Cat.7 - spĺňa požiadavky noriem ISO/IEC 11801, IEC 61156-6, EN 50173-1 a EN 50288. Oblasť použitia: Dátový kábel pre štúdiové aplikácie, Video Ethernet, IEEE 802.3, 10Base-T, 100Base-T, 1000Base-T, IEEE 802.5 16 MB, ISDN, FDDI, ATM. Vhodný pre vonkajšie použitie (odolný voči UV žiareniu) , ale nie na priame uloženie do zeme. Vhodný pre neustále pohyby.
| Izolácia drôtu | Pena-Skin-PE |
| Identifikácia vodiča | Farba |
| výstuž | bez |
| Prierez AWG | 26/7 |
| Prevádzková kapacita | 43 pF/km |
| Polomer ohybu (dynamický) | 40 mm |
| Polomer ohybu (statický) | 4 x n. l. |
| Smernica/Nariadenie | Smernica RoHS 2011/65/EÚ |
| Eurotrieda | bez |
| Spomaľovač horenia | Nie |
| Bez halogénov | Nie |
| Bez halogénov podľa normy EN 50267-2-2 | Nie |
| Bez halogénov podľa normy EN 60754-1/2 | Nie |
| Harmonizovaná norma | EN 50575 |
| Inštalačná norma | EN 50174 |
| Izolačný odpor (500 V) | ≥ 2000 MOhm/km |
| Kábel | EN 50288-4-1 1000 / IEC 61156-6 |
| Kábel bez silikónu | Áno |
| Konštrukcia káblov | S/FTP |
| Typ kábla | Draka Patch Pro Flex Cat7 |
| kategória | 7 |
| Tlmenie spojky | ≥ 80 dB |
| Rozdiel v čase behu | max. 10 ns/100 m |
| priemer vodiča | 0,48 mm |
| Trieda rebríkov | Trieda 2 = viacvláknová |
| Materiál rebríka | Cu, holá |
| Prierez rebríka | 0,16 mm² |
| Materiál srsti | Polyuretán (PUR) |
| Maximálna frekvencia | 1000 MHz |
| Hodnota čistej tržnej hodnoty (NVP) | 75 % |
| PoE | podľa IEEE 802.3af PoE / podľa IEEE 802.3at PoE+ / podľa IEEE 802.3bt 4PPoE |
| Skúšobné napätie DC, 1 min | 1000 V |
| Nízka dymivosť | Nie |
| Nízka dymivosť podľa normy EN 61034-2 | Nie |
| Dáždnik nad lanovým prvkom | film |
| Dáždnik cez lano | sieťovina |
| Odpor slučky | 250 ohmov/km |
| Prenosová impedancia pri 10 MHz | 25 mOhm/m |
| Prenosová impedancia pri 1 MHz | 25 mOhm/m |
| Prenosové normy | IEEE 802.3 10 Mbit až 10 Gbit |
| Odolné voči UV žiareniu | Áno |
| štandardy kabeláže | EN 50173-1 / ISO/IEC 11801 |
| Splietací prvok | páry |
| Vlnový odpor | 100 ± 5 ohmov |
| Asymetria odporu | 2 % |
| Prípustná vonkajšia teplota kábla, trvalo nainštalovaného | -20 – 60 °C |
| Prípustná vonkajšia teplota kábla počas pohybu | 0 – 50 °C |
| Prípustná vonkajšia teplota kábla, skladovanie | -20 – 60 °C |
The Cat.7 S/FTP LAN cable with PUR sheath in black from EFB-Elektronik is designed for high-performance network cabling. The S/FTP structure with braided shielding and the polyurethane sheath in RAL 9005 support stable data connections up to 1000 MHz and are therefore suitable for modern installations with high bandwidth.
Ì 1000 MHz Cat.7 bandwidth Í Supports transmission standards from IEEE 802.3 10Mbit to 10Gbit and creates scope for high-performance networks.
Ì S/FTP setup with braided shielding Í Reduces interference and supports stable signal quality in demanding cabling.
Ì UV-resistant PUR jacket in black according to RAL 9005 Í Provides a resistant outer shell for installations with increased requirements.
The cable is designed as a simplex and uses 26/7 conductors with 8 wires. The dynamic bending radius of 40 mm facilitates installation. The braided shielding supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The version without reinforcement is aimed at laying in structured network environments. RoHS 2011/65/UE is met.
Technical details
Ì Brand: EFB-Elektronik
Ì Category: 7
Ì Transmission standards: IEEE 802.3 10Mbit to 10Gbit
Ì Max. frequency: 1000 MHz
Ì Cable construction: S/FTP
Ì PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
Ì AWG cross-section/number of wires: 26/7
Ì Number of cores: 8
Ì Type: simplex
Ì Sheath material: polyurethane (PUR)
Ì Sheath colour: black
Ì RAL colour: RAL 9005
Ì Armour: without
Ì Bend radius (dynamic): 40 mm
Ì Directive/Regulation: RoHS 2011/65/UE
Ì Euroclass: none
Ì UV resistant: Yes
Ì Shield over stranding: braid
Ì 1000 MHz Cat.7 bandwidth Í Supports transmission standards from IEEE 802.3 10Mbit to 10Gbit and creates scope for high-performance networks.
Ì S/FTP setup with braided shielding Í Reduces interference and supports stable signal quality in demanding cabling.
Ì UV-resistant PUR jacket in black according to RAL 9005 Í Provides a resistant outer shell for installations with increased requirements.
The cable is designed as a simplex and uses 26/7 conductors with 8 wires. The dynamic bending radius of 40 mm facilitates installation. The braided shielding supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The version without reinforcement is aimed at laying in structured network environments. RoHS 2011/65/UE is met.
Technical details
Ì Brand: EFB-Elektronik
Ì Category: 7
Ì Transmission standards: IEEE 802.3 10Mbit to 10Gbit
Ì Max. frequency: 1000 MHz
Ì Cable construction: S/FTP
Ì PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
Ì AWG cross-section/number of wires: 26/7
Ì Number of cores: 8
Ì Type: simplex
Ì Sheath material: polyurethane (PUR)
Ì Sheath colour: black
Ì RAL colour: RAL 9005
Ì Armour: without
Ì Bend radius (dynamic): 40 mm
Ì Directive/Regulation: RoHS 2011/65/UE
Ì Euroclass: none
Ì UV resistant: Yes
Ì Shield over stranding: braid
| Ader-Isolation | Foam-Skin-PE |
| Ader-Kennzeichnung | Farbe |
| Armierung | ohne |
| AWG-Querschnitt | 26/7 |
| Betriebskapazität | 43 pF/km |
| Biegeradius (dynamisch) | 40 mm |
| Biegeradius (statisch) | 4 x AD |
| Direktive/Verordnung | RoHS 2011/65/UE |
| Euroklasse | ohne |
| Flammwidrig | Nein |
| Halogenfrei | Nein |
| Halogenfrei nach EN 50267-2-2 | Nein |
| Halogenfrei nach EN 60754-1/2 | Nein |
| Harmonisierte Norm | EN 50575 |
| Installationsstandard | EN 50174 |
| Isolationswiderstand (500V) | ≥ 2000 MOhm/km |
| Kabel | EN 50288-4-1 1000, IEC 61156-6 |
| Kabel silikonfrei | Ja |
| Kabelaufbau | S/FTP |
| Kabeltyp | Draka Patch Pro Flex Cat7 |
| Kategorie | 7 |
| Kopplungsdämpfung | ≥ 80 dB |
| Laufzeitunterschied | max. 10 ns/100m |
| Leiterdurchmesser | 0,48 mm |
| Leiter-Durchmesser | 0,48 mm |
| Leiter-Klasse | Kl.2 = mehrdrähtig |
| Leiter-Material | Cu, blank |
| Leiternennquerschnitt | 0,16 mm² |
| Mantelmaterial | Polyurethan (PUR) |
| Mantel-Material | Polyurethan (PUR) |
| Max. Frequenz | 1000 MHz |
| NVP-Wert | 75 |
| PoE | nach IEEE802.3af PoE, nach IEEE802.3at PoE+, nach IEEE802.3bt 4PPoE |
| Prüfspannung DC, 1 min | 1000 V |
| Raucharm | Nein |
| Raucharm nach EN 61034-2 | Nein |
| Schirm über Verseilelement | Folie |
| Schirm über Verseilung | Geflecht |
| Schleifenwiderstand | 250 Ohm/km |
| Transferimpedanz bei 10MHz | 25 mOhm/m |
| Transferimpedanz bei 1MHz | 25 mOhm/m |
| Übertragungsstandards | IEEE 802.3 10Mbit bis 10Gbit |
| UV beständig | Ja |
| Verkabelungsstandards | EN 50173-1, ISO/IEC 11801 |
| Verseilelement | Paare |
| Wellenwiderstand | 100 ± 5 Ohm |
| Widerstandsunsymmetrie | 2 % |
| Zul. Kabelaußentemperatur, fest verlegt | -20 – 60 °C |
| Zul. Kabelaußentemperatur, in Bewegung | 0 – 50 °C |
| Zul. Kabelaußentemperatur, Lagerung | -20 – 60 °C |
Dĺžka
500m
Kategória
cat. 7 / class F / 1000MHz
Typ
lanko
Materiál vodiča
Cu
Farba
čierna
Tienenie
S/FTP (PiMF)
LSOH/LSZH bezhalogénový
nie
Vhodný do exteriéru
áno
Dvojitý (Duplex)
nie
Hrúbka vodiča (AWG)
AWG26
Po - Št 8:00 - 16:30
Piatok 8:00 - 16:00
-
99262.500_EN.pdf 99262.500_EN.pdf












































































