Inštalačný kábel INFRALAN© 99980.x-CPR je konštruovaný pre prenosy do 1000 MHz a svojimi elektrickými prenosovými vlastnosťami prekračuje požiadavky kategórie 7. S týmto káblom sú možné prenosové rýchlosti až 10 Gb/s podľa normy IEEE 802.3.
| Izolácia drôtu | Pena-Skin-PE |
| Identifikácia vodiča | Farba |
| výstuž | bez |
| Prierez AWG | 23/1 |
| Prevádzková kapacita | 43 pF/km |
| Polomer ohybu (dynamický) | 40 mm |
| Polomer ohybu (statický) | 4 x n. l. |
| Smernica/Nariadenie | Smernica RoHS 2011/65/EÚ |
| Eurotrieda | Eca |
| Spomaľovač horenia | podľa normy EN 60332-1 |
| Bez halogénov | podľa normy EN 60754-1/2 |
| Bez halogénov podľa normy EN 50267-2-2 | Áno |
| Bez halogénov podľa normy EN 60754-1/2 | Áno |
| Harmonizovaná norma | EN 50575 |
| Inštalačná norma | EN 50174 |
| Izolačný odpor (500 V) | ≥ 2000 MOhm/km |
| Kábel | EN 50288-4-1 1000 / IEC 61156-6 |
| Kábel bez silikónu | Áno |
| Konštrukcia káblov | S/FTP |
| Typ kábla | EFB Cat.7 S/FTP AWG23 Eca |
| kategória | 7 |
| Tlmenie spojky | ≥ 80 dB |
| Typ útlmu väzby | Typ 2 |
| Rozdiel v čase behu | ≤ 12 ns/100 m |
| priemer vodiča | 0,56 mm |
| Trieda rebríkov | Trieda 1 = jeden vodič |
| Materiál rebríka | Cu, holá |
| Prierez rebríka | 0,26 mm² |
| Materiál srsti | FRNC-B |
| Maximálna frekvencia | 1000 MHz |
| Hodnota čistej tržnej hodnoty (NVP) | 79 % |
| PoE | podľa IEEE 802.3af PoE / podľa IEEE 802.3at PoE+ / podľa IEEE 802.3bt 4PPoE |
| Skúšobné napätie DC, 1 min | 1000 V |
| Nízka dymivosť | podľa normy EN 61034 |
| Nízka dymivosť podľa normy EN 61034-2 | Nie |
| Dáždnik nad lanovým prvkom | film |
| Dáždnik cez lano | sieťovina |
| Odpor slučky | 154 ohmov/km |
| Prenosová impedancia pri 10 MHz | ≤ 10 mOhm/m |
| Prenosová impedancia pri 1 MHz | 12 mOhm/m |
| Prenosová impedancia pri 30 MHz | 30 mOhm/m |
| Trieda oddelenia podľa normy EN50174-2 | D |
| Prenosové normy | IEEE 802.3 10 Mbit až 10 Gbit |
| Odolné voči UV žiareniu | Nie |
| štandardy kabeláže | EN 50173-1 / ISO/IEC 11801 |
| Splietací prvok | páry |
| Vlnový odpor | 100 ± 5 ohmov |
| Asymetria odporu | 2 % |
| Prípustná vonkajšia teplota kábla, trvalo nainštalovaného | -20 – 60 °C |
| Prípustná vonkajšia teplota kábla počas pohybu | 0 – 50 °C |
| Prípustná vonkajšia teplota kábla, skladovanie | -20 – 60 °C |
The INFRALAN© Cat.7 installation cable S/FTP 1000 MHz in orange is designed for high-performance network cabling. The S/FTP design with FRNC-B jacket and Euroclass Eca supports stable data connections up to 1000 MHz and is therefore suitable for installations with high bandwidth. The simplex version with 23/1 conductors and 8 wires is designed for fixed installation in structured networks.
Ì 1000 MHz Cat.7 bandwidth Í Supports transmission standards from IEEE 802.3 10Mbit to 10Gbit and creates scope for high-performance networks.
Ì S/FTP design with braid shielding Í Reduces interference and supports stable signal quality in demanding cabling.
Ì FRNC-B jacket in orange with RAL 2003 and Euroclass Eca Í Complements the installation with a halogen-free material selection according to EN 60754-1/2 and RoHS 2011/65/UE.
The cable is designed as a simplex and uses 23/1 conductors with 8 wires. The dynamic bending radius of 40 mm facilitates installation. The braided shielding supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The version without reinforcement is aimed at installation in structured network environments.
Technical details
Ì Brand: INFRALAN
Ì Category: Cat.7
Ì Transmission standards: IEEE 802.3 10Mbit to 10Gbit
Ì Max. frequency: 1000 MHz
Ì Cable construction: S/FTP
Ì PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
Ì AWG cross-section/number of wires: 23/1
Ì Number of cores: 8
Ì Type: simplex
Ì Sheath material: FRNC-B
Ì Sheath colour: orange
Ì RAL colour: RAL 2003
Ì Armour: without
Ì Bend radius (dynamic): 40 mm
Ì Directive/Regulation: RoHS 2011/65/UE
Ì Euroclass: Eca
Ì Halogen-free: according to EN 60754-1/2
Ì Shield over stranding: braid
Ì 1000 MHz Cat.7 bandwidth Í Supports transmission standards from IEEE 802.3 10Mbit to 10Gbit and creates scope for high-performance networks.
Ì S/FTP design with braid shielding Í Reduces interference and supports stable signal quality in demanding cabling.
Ì FRNC-B jacket in orange with RAL 2003 and Euroclass Eca Í Complements the installation with a halogen-free material selection according to EN 60754-1/2 and RoHS 2011/65/UE.
The cable is designed as a simplex and uses 23/1 conductors with 8 wires. The dynamic bending radius of 40 mm facilitates installation. The braided shielding supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt. The version without reinforcement is aimed at installation in structured network environments.
Technical details
Ì Brand: INFRALAN
Ì Category: Cat.7
Ì Transmission standards: IEEE 802.3 10Mbit to 10Gbit
Ì Max. frequency: 1000 MHz
Ì Cable construction: S/FTP
Ì PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
Ì AWG cross-section/number of wires: 23/1
Ì Number of cores: 8
Ì Type: simplex
Ì Sheath material: FRNC-B
Ì Sheath colour: orange
Ì RAL colour: RAL 2003
Ì Armour: without
Ì Bend radius (dynamic): 40 mm
Ì Directive/Regulation: RoHS 2011/65/UE
Ì Euroclass: Eca
Ì Halogen-free: according to EN 60754-1/2
Ì Shield over stranding: braid
| Ader-Isolation | Foam-Skin-PE |
| Ader-Kennzeichnung | Farbe |
| Armierung | ohne |
| AWG-Querschnitt | 23/1 |
| Betriebskapazität | 43 pF/km |
| Biegeradius (dynamisch) | 40 mm |
| Biegeradius (statisch) | 4 x AD |
| Direktive/Verordnung | RoHS 2011/65/UE |
| Euroklasse | Eca |
| Flammwidrig | nach EN 60332-1 |
| Halogenfrei | nach EN 60754-1/2 |
| Halogenfrei nach EN 50267-2-2 | Ja |
| Halogenfrei nach EN 60754-1/2 | Ja |
| Harmonisierte Norm | EN 50575 |
| Installationsstandard | EN 50174 |
| Isolationswiderstand (500V) | ≥ 2000 MOhm/km |
| Kabel | EN 50288-4-1 1000, IEC 61156-6 |
| Kabel silikonfrei | Ja |
| Kabelaufbau | S/FTP |
| Kabeltyp | EFB Cat.7 S/FTP AWG23 Eca |
| Kategorie | 7 |
| Kopplungsdämpfung | ≥ 80 dB |
| Kopplungsdämpfung Typ | Typ 2 |
| Laufzeitunterschied | ≤ 12 ns/100m |
| Leiterdurchmesser | 0,56 mm |
| Leiter-Durchmesser | 0,56 mm |
| Leiter-Klasse | Kl.1 = eindrähtig |
| Leiter-Material | Cu, blank |
| Leiternennquerschnitt | 0,26 mm² |
| Mantelmaterial | FRNC-B |
| Mantel-Material | FRNC-B |
| Max. Frequenz | 1000 MHz |
| NVP-Wert | 79 % |
| PoE | nach IEEE802.3af PoE, nach IEEE802.3at PoE+, nach IEEE802.3bt 4PPoE |
| Prüfspannung DC, 1 min | 1000 V |
| Raucharm | nach EN 61034 |
| Raucharm nach EN 61034-2 | Nein |
| Schirm über Verseilelement | Folie |
| Schirm über Verseilung | Geflecht |
| Schleifenwiderstand | 154 Ohm/km |
| Transferimpedanz bei 10MHz | ≤ 10 mOhm/m |
| Transferimpedanz bei 1MHz | 12 mOhm/m |
| Transferimpedanz bei 30MHz | 30 mOhm/m |
| Trennklasse gem. EN50174-2 | D |
| Übertragungsstandards | IEEE 802.3 10Mbit bis 10Gbit |
| UV beständig | Nein |
| Verkabelungsstandards | EN 50173-1, ISO/IEC 11801 |
| Verseilelement | Paare |
| Wellenwiderstand | 100 ± 5 Ohm |
| Widerstandsunsymmetrie | 2 % |
| Zul. Kabelaußentemperatur, fest verlegt | -20 – 60 °C |
| Zul. Kabelaußentemperatur, in Bewegung | 0 – 50 °C |
| Zul. Kabelaußentemperatur, Lagerung | -20 – 60 °C |
Dĺžka
100m
Kategória
cat. 7 / class F / 1000MHz
Typ
drôt
Materiál vodiča
Cu
Farba
oranžová
Tienenie
S/FTP (PiMF)
LSOH/LSZH bezhalogénový
áno
Vhodný do exteriéru
nie
Dvojitý (Duplex)
nie
Hrúbka vodiča (AWG)
AWG23
Po - Št 8:00 - 16:30
Piatok 8:00 - 16:00












































































